Electrical and electronic waste and scrap :

Section XVI

Machinery and Mechanical Appliances; Electrical Equipment; Parts thereof; Sound Recorders and Reproducers, Television Image and Sound Recorders and Reproducers, and Parts and Accessories of Such Articles

Notes

This Section does not cover the following:

(a)

Transmission or conveyor belts or belting, of plastics of Chapter 39, or of vulcanised rubber (heading 40.10), or other articles of a kind used in machinery or mechanical or electrical appliances or for other technical uses, of vulcanised rubber(excluding hard rubber) (heading 40.16);

(b)

articles of leather or of composition leather (heading 42.05) or of furskin (heading 43.03), of a kind used in machinery or mechanical appliances or for other technical uses;

(c)

bobbins, spools, cops, cones, cores, reels or similar supports, of any material (for example, Chapter 39, 40,.44 or 48 or Section XV);

(d)

perforated cards for Jacquard or similar machines (for example, Chapter 39 or 48 or Section XV);

(e)

transmission or conveyor belts or belting of textile material (heading 59.10) or other articles of textile material for technical uses (heading 59.11);

(f)

precious or semi-precious stones (natural, synthetic or reconstructed) of headings 71.02 to 71.04, or articles wholly of such stones of heading 71.16 (excluding unmounted worked sapphires and diamonds for styli) (heading 85.22));

(g)

parts of general use, as defined in Note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39);

(h)

drill pipe (heading 73.04);

(ij)

endless belts of metal wire or strip (Section XV);

(k)

articles of Chapter 82 or 83;

(l)

articles of Section XVII;

(m)

articles of Chapter 90;

(n)

clocks, watches or other articles of Chapter 91;

(o)

interchangeable tools of heading 82.07 or brushes of a kind used as parts of machines (heading 96.03); similar interchangeble tools are to be classified according to the constituent material of their working part (for example, in Chapter 40, 42, 43, 45 or 59 or heading 68.04 or 69.09);

(p)

articles of Chapter 95; or

(q)

typewriter or similar ribbons, whether or not on spools or in cartridges (classified according to their constituent material, or in heading 96.12 if inked or otherwise prepared for giving impressions), or monopods, bipods, tripods and similar articles, of heading 96.20.

Subject to Note 1 to this Section, Note 1 to Chapter 84 and Note 1 to Chapter 85, parts of machines (not being parts of the articles of heading 84.84, 85.44, 85.45, 85.46 or 85.47) are to be classified according to the following rules:

(a)

Parts which are goods included in any of the headings of Chapters 84 or 85 (excluding headings 84.09, 84.31, 84.48, 84.66, 84.73, 84.87, 85.03, 85.22, 85.29, 85.38 and 85.48) are in all cases to be classified in their respective headings;

(b)

other parts, if suitable for use solely or principally with a particular kind of machine, or with a number of machines of the same heading (including a machine of heading 84.79 or 85.43) are to be classified with the machines of that kind or in heading 84.09, 84.31, 84.48, 84.66, 84.73, 85.03, 85.22, 85.29 or 85.38 as appropriate. However, parts which are equally suitable for use principally with the goods of headings 85.17 and 85.25 to 85.28 are to be classified in heading 85.17, and parts which are suitable for use solely or principally with goods of heading 85.24 are to classified in heading 85.29;

(c)

all other parts are to be classified in heading 84.09, 84.31, 84.48, 84.66, 84.73, 85.03, 85.22, 85.29 or 85.38 as appropriate or, failing that in heading 84.87 or 85.48.

Unless the context otherwise requires, composite machines consisting of two or more machines fitted together to form a whole and other machines designed for the purpose of performing two or more complementary or alternative functions are to be classified as if consisting only of that component or as being that machine which performs the principal function.

Where a machine (including a combination of machines) consists of individual components (whether separate or inter-connected by piping, by transmission devices, by electric cables or by other devices) intended to contribute together to a clearly defined function covered by one of the headings in Chapter 84 or Chapter 85, then the whole falls to be classified in the heading appropriate to that function.

For the purposes of these Notes, the expression "machine" means any machine, machinery, plant, equipment, apparatus or appliance cited in the headings of Chapter 84 or 85. 6.(A) Throughout the Nomenclature, the expression "electrical and electronic waste and scrap" means electrical and electronic assemblies, printed circuit boards, and electrical or electronic articles that:

(i)

have been rendered unusable for the original purpose by breakage, cutting-up or other processes or economically unsuitable for repair, refurbishment or renovation to render them fit for original purposes; and

(ii)

are packed or shipped in a manner not intended to protect individual articles from damage during transportation, loading and unloading operation.

(B)

Mixed consignments of "electrical and electronic waste and scrap" and other waste and are to be classified in heading 85.49.

(C)

This section does not cover municipal waste, as defined in Note 4 to Chapter 38.

Additional Notes

The Commissioner may in his discretion and in the circumstances which he deems exceptional, in respect of an unassembled or disassembled machine, allow the provisions of General Note A. 2(a) to be applied also to an unassembled or disassembled machine of this Section which is imported in more than one consignment if the mass of such machine exceeds 500 t or is of a measurement for shipping purposes exceeding 500 m³, provided the application to enter the unassembled or disassembled machine in terms of this Note reaches the Commissioner prior to the importation of the first consignment.

No paragraph.

Tools necessary for the assembly or maintenance of machines or appliances are to be classified with those machines or appliances if imported with them. Interchangeable tools imported with machines or appliances are also to be classified therewith if they form part of the normal equipment of the machines or appliances and are normally sold with them.

A reference in this Section to "portable" or to "mobile" is deemed to relate to machinery or other goods, irrespective of the mass or construction thereof, which can readily be moved, carried, transferred or conveyed by any means, for use on different premises and which are not for any reason in connection with the operation of the machinery or other goods, required to be attached permanently.

Chapter 85

Electrical Machinery and Equipment and Parts thereof; Sound Recorders and Reproducers, Television Image and Sound Recorders and Reproducers, and Parts and Accessories of Such Articles

Notes

This Chapter does not cover the following:

(a)

electrically warmed blankets, bed pads, foot-muffs or the like; electrically warmed clothing, footwear or ear pads or other electrically warmed articles on or about the person;

(b)

articles of glass of heading 70.11;

(c)

machines and apparatus of heading 84.86;

(d)

vacuum apparatus of a kind used in medical, surgical, dental or veterinary sciences (heading 90.18); or

(e)

electrically heated furniture of Chapter 94.

Headings 85.01 to 85.04 do not apply to goods described in heading 85.11, 85.12, 85.40, 85.41 or 85.42. However, metal tank mercury arc rectifiers remain classified in heading 85.04.

For the purposes of heading 85.07, the expression "electric accumulators" includes those presented with ancillary components which contribute to the accumulator's function of the storing and supplying energy or protect it from damage, such as electrical connectors, temperature control devices (for example, thermistors) and circuit protection devices. They may also include a portion of the protective housing of the goods in which they are to be used.

Heading 85.09 covers only the following electro-mechanical machines of the kind commonly used for domestic purposes:

(a)

floor polishers, food grinders and mixers, and fruit or vegetable juice extractors, of any mass;

(b)

other machines provided the mass of such machines does not exceed 20 kg. The heading does not, however, apply to fans or ventilating or recycling hoods incorporating a fan, whether or not fitted with filters (heading 84.14), centrifugal clothes-dryers (heading 84.21), dish washing machines (heading 84.22), household washing machines (heading 84.50), roller or other ironing machines (heading 84.20 or 84.51), sewing machines (heading 84.52), electric scissors (heading 84.67) or to electrothermal appliances (heading 85.16).

For the purposes of heading 85.17, the term "smartphones" means telephones for cellular networks, equipped with a mobile operating system designed to perform the functions of an automatic data processing machine such as downloading and running multiple applications simultaneously, including third-party applications, and whether or not integrating other features such as digital cameras and navigational aid systems

For the purposes of heading 85.23:

(a)

"Solid-state non-volatile storage devices" (for example, "flash memory cards" or "flash electronic storage cards") are storage devices with a connecting socket, comprising in the same housing one or more flash memories (for example, "FLASH E2PROM") in the form of integrated circuits mounted on a printed circuit board. They may include a controller in the form of an integrated circuit and discrete passive components, such as capacitors and resistors;

(b)

the term "smart cards" means cards which have embedded in them one or more electronic integrated circuits (a microprocessor, random access memory (RAM) or read-only memory (ROM) in the form of chips.These cards may contain contacts, a magnetic stripe or an embedded antenna but do not contain any other active or passive circuit elements.

For the purposes of heading 85.24, "flat-panel display modules" refer to devices or apparatus for the display of information, equipped at a minimum with a display screen, which are designed to be incorporated into articles of other headings prior to use. Display screens for flat panel display modules include, but are no limited to, those which are flat, curved, flexible, foldable or stretchable in form. Flat panel display modules may incorporate additional elements, including those necessary for receiving video signals and the allocation of those signals to pixels on the display. However, heading 85.24 does not include display modules which are equipped with components for converting video signals (e.g. a scaler IC, decoder IC or application processor) or have otherwise assumed the character of goods of other headings.

For the classification of flat panel display modules defines in this Note, heading 85.24 shall take precedence over any other heading in the Nomenclature.

For the purposes of heading 85.34 "printed circuits" are circuits obtained by forming on an insulating base, by any printing process (for example, embossing, plating-up, etching) or by the "film circuit" technique, conductor elements, contacts or other printed components (for example, inductances, resistors, capacitors) alone or interconnected according to a pre-established pattern, except elements which can produce, rectify, modulate or amplify an electrical signal (for example, semiconductor elements). The expression "printed circuits" does not cover circuits combined with elements other than those obtained during the printing process, nor does it cover individual, discrete resistors, capacitors or inductances. Printed circuits may, however, be fitted with non-printed connecting elements. Thin- or thick-film circuits

comprising passive and active elements obtained during the same technological process are to be classified in heading 85.42.

For the purpose of heading 85.36, "connectors for optical fibres, optical fibre bundles or cables" means connectors that simply mechanically align optical fibres end to end in a digital line system. They perform no other function, such as the amplification, regeneration or modification of a signal.

10.

Heading 85.37 does not include cordless infrared devices for the remote control of television receivers or other electrical equipment (heading 85.43).

11.

For the purposes of heading 85.39, the expression "light-emitting diodes (LED) light sources" covers:

(a)

"Light-emitting diode (LED) modules" which are electrical light sources based on light-emitting diodes (LED) arranged in electrical circuits and containing further elements like electrical, mechanical, thermal or optical elements. They also contain discrete active elements, discrete passive elements, or articles of heading 85.36 or 85.42 for the purposes of providing power supply or power control. Light-emitting diode (LED) modules do not have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact.

(b)

"Light-emitting diode (LED) lamps" which are electrical light sources containing one or more LED modules containing further elements like electrical, mechanical, thermal or optical elements. The distinction between light-emitting diode (LED) modules and light-emitting diode (LED) lamps is that lamps have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact.

12.

For the purposes of headings 85.41 and 85.42: (a)(i) "Diodes, transistors and similar semiconductor devices" are semiconductor devices the operation of which depends on variations in resistivity on the application of an electric field; Semiconductor devices may also include assembly of plural elements, whether or not equipped with active and passive device ancillary functions.

"Semiconductor-based transducers" are, for the purposes of this definition, semiconductor-based sensors, semiconductor-based actuators, semiconductor-based resonators and semiconductor- based oscillators, which are types of discrete semiconductor-based devices, which perform an intrinsic function, which are able to convert any kind of physical or chemical phenomena or an action into an electrical signal or an electrical signal into any type of physical phenomenon or an action.

All the elements in semiconductor-based transducers are indivisibly combined, and may also include necessary materials indivisibly attached, that enable their construction or function.

The following expressions mean:

(1)

"Semiconductor-based" means built or manufactured on a semiconductor substrate or made of semiconductor materials, manufactured by semiconductor technology, in which the semiconductor substrate or material plays a critical and unreplaceable role of transducer function and performance, and the operation of which is based on semiconductor properties including physical, electrical, chemical and optical properties.

(2)

"Physical or chemical phenomena" relate to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc.

(3)

"Semiconductor-based sensor" is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of the semiconductor and that have the function of detecting physical or chemical quantities and converting these into electric signals caused by resulting variations in electric properties of displacement of a mechanical structure.

(4)

"Semiconductor-based actuator" is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of converting electric signals into physical movement

(5)

"Semiconductor-based resonator" is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of the semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures in response to an external input.

(6)

"Semiconductor-based oscillator" is a type of a semiconductor device, which consists of microelectronic or mechanical structure that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures.

(ii)

"Light-emitting diodes (LED)" are semiconductor devices based on semiconductor materials which convert electrical energy into visible, infra-red or ultra-violet rays, whether or not electrically connected among each other and whether or not combined with protective diodes. Light-emitting diodes" of heading 85.41 do not incorporate elements for the purposes of providing power supply of power control;

(b)

"Electronic integrated circuits" are:

(i)

monolithic integrated circuits in which the circuit elements (diodes, transistors, resistors, capacitors, inductances, etc.) are created in the mass (essentially) and on the surface of a semiconductor or compound semiconductor material (for example, doped silicon, gallium arsenide, silicon germanium, indium phosphide) and are inseparably associated;

(ii)

hybrid intergrated circuits in which passive elements (resistors, capacitors, inductances, etc.), obtained by thin- or thick-film technology, and active elements (diodes, transistors, monolithic

integrated circuits, etc.), obtained by semiconductor technology, are combined to all intents and purposes indivisibly, by interconnections or interconnecting cables, on a single insulating substrate (glass, ceramic, etc.). These circuits may also include discrete components;

(iii)

multichip integrated circuits consisting of two or more interconnected monolithic integrated circuits combined to all intents and purposes indivisibly, whether or not on one or more insulating substrates, with or without leadframes, but with no other active or passive circuit elements.

(iv)

multi-component integrated circuits (MCOs): a combination of one or more monolithic, hybrid, or multi-chip integrated circuits with at least one of the following components: silicon-based sensors, actuators, oscillators, resonators or combinations thereof, or components performing the functions of articles classifiable under heading 85.32, 85.33, 85.41, or inductors classifiable under heading 85.04, formed to all intents and purposes indivisibly into a single body like an integrated circuit, as a component of a kind used for assembly onto a printed circuit board (PCB) or other carrier, through the connecting of pins, leads, balls, lands, bumps or pads. For the purpose of this definition:

"Components" may be discrete, manufactured independently then assembled on the rest of the MCO, or integrated into other components.

"Silicon based" means built on a silicon substrate, or made of silicon materials, or manufactured onto integrated circuit die.

(a)

"Silicon based sensors" consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of detecting physical or chemical phenomena and transducing these into electric signals, caused by resulting variations in electric properties or displacement of a mechanical structure. "Physical or chemical phenomena" relates to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc.

(b)

"Silicon based actuators" consist of microelectronic and mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of converting electrical signals into physical movements.

(c)

"Silicon based resonators" are components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures in response to an external input.

(d)

"Silicon based oscillators" are active components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures. For the classification of the articles defined in this Note, headings 85.41 and 85.42 shall take precedence over any other heading in this Schedule, except in the case of heading 85.23, which might cover them by reference to, in particular, their function.

Subheading Notes

Subheading 8525.81 covers only high-speed television cameras, digital cameras and video camera recorders having one or more of the following characteristics: - writing speed exceeding 0.5 mm per microsecond; - time resolution 50 nanoseconds or less; - frame rate exceeding 225,000 frames per second.

In respect of subheading 8525.82, radiation-hardened or radiation-tolerant television cameras, digital cameras and video camera recorders are designed or shielded to enable operation in a high-radiation environment. These cameras are designed to withstand a total radiation dose of at least 50 x 103 Gy(silicon) (5 x 106 RAD (Silicon)), without operational degradation.

Subheading 8525.83 covers night vision television cameras, digital cameras and video camera recorders which use a photocathode to convert available light to electrons, which can be amplified and converted to yield a visible image. This subheading excludes thermal imaging cameras (generally subheading 8525.89)

Subheading 8527.12 covers only cassette-players with built-in amplifiers, without built-in loudspeaker, capable of operating without an external source of electric power and the dimensions of which do not exceed 170 mm x 100 mm x 45 mm.

For the purposes of subheadings 8549.11 to 8549.19, "spent primary cells, spent primary batteries and spent electric accumulators" are those which are neither usable as such because of breakage, cutting- up, wear or other reasons, nor capable of being recharged.

Additional Note

For the purposes of this Chapter the expression "recorded books as defined in Additional Note 1 to Chapter 85" means the oral narration of the text of printed publications, recorded onto gramophone records, magnetic tapes, compact discs or similar media without any added commentary.

Heading	CD	Description	Unit	General	EU	EFTA	SADC
85.49		Electrical and electronic waste and scrap :
8549.1		- Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators:
8549.11		-- Waste and scrap of lead-acid accumulators; spent lead-acid accumulators:
8549.11.10	7	--- Of a kind used for starting piston engines, of tariff subheading 8507.10	kg	free	free	free	free
8549.11.90	5	--- Other	kg	free	free	free	free
8549.12	6	-- Other, containing lead, cadmium or mercury	kg	free	free	free	free
8549.13	2	-- Sorted by chemical type and not containing lead, cadmium or mercury	kg	free	free	free	free
8549.14	9	-- Unsorted and not sorted containing lead, cadmium or mercury	kg	free	free	free	free
8549.19	0	-- Other	kg	free	free	free	free
8549.2		- Of a kind used principally for the recovery of precious metal :
8549.21		-- Containing primary cells, primary batteries, electric accumulators, mercury-switches, glass from cathode-ray tubes or other activated glass, or electrical or electronic components containing cadmium, mercury, lead or polychlorinated biphenyls (PCBs):
8549.21.10	1	--- Of plastics, containing silver compounds	kg	15%	free	free	free
8549.21.90	1	--- Other	kg	free	free	free	free
8549.29		-- Other:
8549.29.10	2	--- Of plastics, containing silver compounds	kg	15%	free	free	free
8549.29.90	0	--- Other	kg	free	free	free	free
8549.3		- Other electrical and electronic assemblies and printed circuit boards:
8549.31	9	-- Containing primary cells, primary batteries, electric accumulators, mercury-switches, glass from cathode-ray tubes or other activated glass or electrical or electronic components containing cadmium, mercury, lead or polychlorinated biphenyls(PCBs)	kg	free	free	free	free
8549.39	0	-- Other	kg	free	free	free	free
8549.9		- Other:
8549.91	6	-- Containing primary cells, primary batteries, electric accumulators, mercury-switches, glass from cathode-ray tubes or other activated glass, or electrical or electronic components containing cadmium, mercury, lead or polychlorinated biphenyls (PCBs)	kg	free	free	free	free
8549.99	7	-- Other	kg	free	free	free	free

Disclaimer: Information is provided as a free service and is for reference purposes only. It does not constitute the provision of professional advice of any kind. No responsibility for any loss caused to any person acting or refraining from action as a result of any material in this publication can be accepted by the author, copyright owner or publisher. Tariff information should be confirmed with SARS.

Customs - Tariff Book Last updated: 9 May 2025

SA Customs Tariff (Schedule 1 Part 1) Print